Spain's blackout highlights renewables' grid challenge

Spain's blackout highlights renewables' grid challenge

Power grids must evolve to adapt as countries move away from fossil fuels
Power grids must evolve to adapt as countries move away from fossil fuels. Photo: CESAR MANSO / AFP/File
Source: AFP

The cause of last week's massive power outage in Spain and Portugal remains unclear but it has shone a spotlight on solar and wind energy, which critics accuse of straining electricity grids.

The rise of renewables presents a challenge for power grids, which must evolve to adapt as countries move away from fossil fuels.

Maintaining stability

Grid operators must ensure that electricity is constantly balanced between demand and supply.

A metric of this balance is the frequency of the electricity flowing through the grid, set at 50 hertz (Hz) in Europe and 60 Hz in the United States. If that number drifts too far off, it can jeopardise the grid.

Historically, the electricity system has relied on conventional power plants -- gas, coal, nuclear and hydroelectric -- that use spinning turbines to generate electricity.

These machines keep the frequency stable.

With their gigantic rotors spinning at high speed, they provide inertia to the system.

Read also

US solar tariffs could drive Asia transition boom

If a power plant fails or if electricity demand increases too quickly, they help stabilise the grid by releasing the kinetic energy stored in the rotors.

Instead of spinning machines, solar and wind farms use electronic systems that feed power into the grid, making it harder to maintain that delicate balance.

Renewable energy will have to do more than provide carbon-free electricity in the future, said Jose Luis Dominguez-Garcia, an electrical systems expert at the Catalonia Energy Research Institute (IREC).

They will have to "assist the system with additional controls to support the grid, particularly in inertia terms", he said.

Marc Petit, professor of electrical systems at top French engineering school CentraleSupelec, argued that moving away from fossil fuels would make hydroelectric and nuclear power plants "even more essential for stabilising the system" as they use rotating machines.

Flywheels

A range of technical solutions already exist to compensate for renewables' lack of inertia and hence to support grid stability.

Read also

Nuclear power sparks Australian election battle

These include gravity storage, cryogenic liquid air, compressed air and concentrated solar power.

As it undergoes a transition away from coal, Britain is banking on flywheels, a tried and tested system.

Surplus power from solar and wind farms is used to make the large wheels turn, creating kinetic energy.

This stored energy can then be converted to provide electricity to the grid if needed.

No sun or wind

Just before the massive blackout on April 28, wind and solar power provided 70 percent of Spain's electricity output. But renewables are intermittent sources of energy as they rely on nature.

When the wind stops blowing or the sun is hiding, other sources have to step in within minutes, or there need to be adequate systems for storing -- and then releasing -- renewables in place.

Depending on the country, backup supply currently comes from mainly thermal power plants (gas or coal), nuclear reactors or hydroelectricity.

Read also

Massive blackout hits Spain and Portugal

To handle the ups and downs of renewable power, countries must ramp up storage capacity.

The most widespread method is pumped storage hydropower from water reservoirs.

But large stationary batteries, akin to shipping containers, are increasingly being deployed alongside wind and solar farms -- a segment dominated by China.

To meet the global goal of tripling renewable capacity by 2030, storage capacity will have to increase sixfold, with batteries doing 90 percent of the work, according to the International Energy Agency.

Another way to ease pressure on the system would be to shift electricity use -- for example when you charge your car battery -- to the middle of the day, when solar power is at its peak.

Rescale the network

Widespread blackouts "have virtually always been triggered by transmission network failures, not by generation, renewables or otherwise", said Mike Hogan, advisor with the Regulatory Assistance Project (RAP), an NGO whose stated goal is to achieve a clean, reliable, equitable and cost-efficient energy future.

Read also

Foreign carmakers strive for 'China Speed' to stay in race

Tens of billions of euros, perhaps hundreds of billions, will be needed to renovate ageing power lines and replace them with new ones that are more powerful.

The need to modernise or expand the lines is pressing as energy-hungry data centres are growing and factories are increasingly consuming electricity.

Countries also need to strengthen interconnections between their power systems.

Such cross-border links helped to restore power to Spain as France stepped in to share electricity during the blackout.

By 2028, exchange capacity between the two neighbours is expected to increase from 2.8 to 5.0 gigawatts, reducing the peninsula's relative electrical isolation.

PAY ATTENTION: Сheck out news that is picked exactly for YOU ➡️ find the “Recommended for you” block on the home page and enjoy!

Source: AFP

Authors:
AFP avatar

AFP AFP text, photo, graphic, audio or video material shall not be published, broadcast, rewritten for broadcast or publication or redistributed directly or indirectly in any medium. AFP news material may not be stored in whole or in part in a computer or otherwise except for personal and non-commercial use. AFP will not be held liable for any delays, inaccuracies, errors or omissions in any AFP news material or in transmission or delivery of all or any part thereof or for any damages whatsoever. As a newswire service, AFP does not obtain releases from subjects, individuals, groups or entities contained in its photographs, videos, graphics or quoted in its texts. Further, no clearance is obtained from the owners of any trademarks or copyrighted materials whose marks and materials are included in AFP material. Therefore you will be solely responsible for obtaining any and all necessary releases from whatever individuals and/or entities necessary for any uses of AFP material.