After buying an iron, it pleases you with ITS gloss and cleanliness, but after some time you will face the issue of how to clean it. Iron a silk blouse at the wrong temperature and you will get a burn-on defect. Find out different ways of how to clean an iron and get the device back to its original condition.
Here are the tips and tricks on how to clean iron without scratching it and with the help of universal and proven methods at home.
How to clean an iron
Fortunately, cleaning this device is not so difficult and should be done regularly. Before you start the cleaning process, you should know how to clean an iron correctly and determine which method is suitable for your device.
Baking soda and water
- Prepare a cleaning paste. You will need one tablespoon of water and two tablespoons of baking soda. The paste should have a liquid consistency, but be dense enough. The paste should stick to the sole of the iron. If possible, use filtered or distilled water.
- Apply the paste to the surface of the device. If oxide spots are not on the entire surface, you can apply the paste directly to the dirty area. You can apply the paste with your fingers or spatula. If the surface is very dirty, leave the mixture for a few minutes to activate its cleaning features.
- Wipe the surface with a damp piece of fabric to clean the surface from the mixture. Make sure you use a damp napkin or a towel. Squeeze the napkin to get rid of the excess moisture and wipe the metal surface.
- Use an earbud to clean the steam outlet. Dip a cotton bud in distilled water, then insert it into each steam hole and clean it. Use several cotton buds if necessary and remember to change them when they become dirty.
- Fill the container with water. If there is already some water in the iron, open the container lid and get rid of it. Fill it with distilled or filtered water.
- Turn on the iron. Set the heat to the highest level. Turn on the steam function. Thanks to this, you can remove scale and dirt that is deep in the holes of the device.
- Iron any piece of fabric for a few minutes. You can use a kitchen towel for this purpose. Brown stripes may remain on the fabric during the process. All you need to do is iron the cloth to clean your device from dirt. If your device has a steam button, press it as often as possible to remove the remaining dirt and scale from the holes located on the metal surface.
- Turn off the device and let it cool down. Make sure your device is on a protected surface (for example, on a kitchen table that is covered with a towel). As the device cools, dirt may drain from its metallic surface. Remember to remove the remaining water from the container.
READ ALSO: How to jump a car: a tutorial
White vinegar and salt
- Mix two parts of white vinegar and one part of salt. Heat the mixture on medium heat. Wait until the salt is completely dissolved. Make sure that vinegar does not boil. Unfortunately, this cleaning agent has an unpleasant smell although it can help to clean your device thoroughly.
- Let the mixture cool slightly. It should be warm, not hot.
- Wear rubber gloves to protect your hands.
- Dip a piece of clean cloth in the mixture and wipe the soleplate with it. Use a soft brush if your iron does not have Teflon coating. Do not use a metal brush.
- Wipe the soleplate with a damp piece of cloth. After you finish cleaning the surface, remove the dirt from its sole. Dip a clean piece of cloth in white vinegar and gently wipe the soleplate. Then, turn on your iron and try to iron a piece of old but clean cloth. Thanks to this, you will be able to remove the remaining dirt.
- Plug in the iron and set it to the lowest value. Take a napkin and gently wipe the metal surface with it until you have completely removed the limescale.
- Having done this, set the iron to a high level and iron a clean piece of cloth to remove any particles from the surface of the soleplate.
- Apply a little bit of toothpaste on the cold sole of your iron.
- Then, remove the paste with a clean piece of fabric.
- Turn on the device and start ironing any fabric for about five minutes.
- If something sticks to the soleplate, turn it on and set the iron to the highest level.
- Turn off the steam.
- Start ironing a newspaper. Do this until the sole of the device is clean.
- If fabric still sticks to the soleplate, you can sprinkle some salt on the newspaper and repeat the process.
In conclusion, it can be noted that knowing how to clean an iron at home, you can always keep your device in a clean condition. This will significantly prolong its usage and affect the quality of ironing various fabrics and clothing positively. Share your helpful tips on this topic in the comments section below.
DISCLAIMER: This article is intended for general informational purposes only and does not address individual circumstances. It is not a substitute for professional advice or help and should not be relied on to make decisions of any kind. Any action you take upon the information presented in this article is strictly at your own risk and responsibility!